Search This Supplers Products:PCB Magazine LoaderPCB Magazine UN-LoaderPCB SeparatorPCBA Cleaning machineBGA Rework StationPCB Inspection Conveyor
SM-620-500 Guillotine type PCB Separator
- group name
- Guillotine type PCB Separator
- Min Order
- 1 piece
- brand name
- SAMTRONIK
- model
- SM-620-500
- Nearest port for product export
- San Deigo, Bangkok, Singapore, California
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, Express Delivery
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, PayPal, Westem Union, Cash
- Export mode
- Export through agents
- update time
- Thu, 21 Nov 2024 15:39:19 GMT
Paramtents
Shear Length 0-500mm
Shear Width 0-unlimited
Shear Thickness 0.2-3.0mm
Shear Speed one segmentation per second
Blade Size 356×45×6mm
Height of component ≦15mm,when component is on upper side ≦19mm, when component is on back
Distance between component and V-slo ≧3mm
Packging & Delivery
-
Min Order1 piece
Briefing
Apply latest pneumatic design of light weight, the PCB could be separated in one time, with minimum internal stress.
Detailed
SM-620-500 PCB Depaneling Machine
Application
Separate precise SMD thin board, aluminum PCB, for special board , please check with Service.
Introduction
Apply latest pneumatic design of light weight, the
PCB could be separated in one time, with minimum
internal stress, especially suitable to separation of
precise SMD or thin board. Unlike double round
blade PCB separator, there won`t be any
bow wave or micro crack generated.
It uses wedge cutter to shear PCB in line, internal
stress decreases to lowest point, even the sensitive
SMD modules or capacitance still won`t be
influenced, then potential risk on quality is
minimized.
Cutter blade applies SKH-11 high speed steel
imported, also suitable to separate PCB without
V-slot
Features
1. Bouble straight blade, highly suitable to separate SMD thin board and aluminum PCB ;
2. Guillotine type, for PCB of thickness 0.2 to 3.0mm, cutting moving distance 1 to 3mm, safe operation;
3. keep internal stress within 80-180Ue, to avoid micro crack and damage to precise components;
4. able to shear edge of V-slot, distance from the component should ≧0.3mm ;
5. shear rate is one segmentation per second, control by foot-plate pneumatic switch ;
6. with calculation function, obvious vision on productivity ;
7. shear blade group is started passively, shear line and position can be handled safely ;
8. shear not by rolling blade, no dust, no motor drive, no pollution of carbon dust ;
9. shear is not by blade friction, so there is no residue from blade ;
10. Shear Blade warranty 6000000 times, no need electricity supply, then no consumption on electric equipment;
11. Air pressure 0.4-0.6Mpa, no need to prepare specific place for the shear ;
12. Could configure moveable working shelf, can move and operate conveniently.
Technique Parameter
Model :SM-620-500
Machine Dimension L/W/H : 850mm×300mm×420mm
Blade size : Upper straight blade 520×60×6mm
Down straight blade520×38×6mm
Blade material :Imported high quality high speed steel
Board width :4-100mm is the best (small piece width, incomplete panel width)
V-cut speed :1mm-300mm/s
V-cut type :Glass fiber board, FR-4 base plate, aluminum base plate and other
single direction V-CUT products
V-CUT thickness :One third of the board thickness
Working Pressure :0.5-0.8mpa
Working Voltage :220V/110V optional
Power :10W
Machine Weight :138kg